Hanson Formpave Source Control - SC Membrane® Jointing Tape

Performance

• Made of inert materials, does not set or cure after placement in the joint
• Movement accommodation; +/-15%
• Tensile strength: 98 Kpa
• Shear strength: 46 Kpa
• Approved for use with potable water WRC Approval No. 9705502
• Outdoor service temperature: -40 °C to +90 °C

Application

• Surface Preparation:
  All surfaces should be clean, dry and free from frost, grease and loose material
• Application temperature range: +5 °C to +30 °C
• Application details:
  Apply directly from the reel onto one surface pressing to give adequate initial adhesion. Remove backing paper and apply other surface onto strip pushing fi rmly to ensure good contact with full area of strip along the length of the joint

Health & Safety

• There are no known health hazards associated with the product in normal use
• Wash hands immediately after use